论坛首页>>其他品牌话筒>>Mojave Audio MA-301FET 电容录音 ...

1首页上一页1下一页尾页
davission
等级:普通会员
头衔: 管理员
星数:
帖数:45
精华:0
积分:90
消息:
  查看资料
发布于:2018-07-04 11:07
字体大小: 1#

Mojave Audio MA-301FET 电容录音话筒

Mojave Audio MA-301FET 电容录音话筒


MojaveAudioMA-301FET 电容录音话筒.png

淘宝连接


MA-301fet

The MA-301fet is a multi-pattern large diaphragm, solid-state condenser microphone. Based upon the popular MA-201fet designed by David Royer, the MA-301fet adds a 3-posistion pickup pattern selector, a15dB pad and a switchable bass roll-off.

Utilizing a 3-micron gold-sputtered capsule, high-quality Jensen audiotransformer, military-grade FET and custom designed low-noise resistors, the MA-301fet performs at a level reminiscent of some of the bestloved classic condenser microphones. Each MA-301fet microphone iscarefully tested and evaluated, then packaged in its protective casewith a professional grade shockmount.

  • udio transformer
  • Military-grade FET
  • Custom designed low-noise resistors
  • Ultra clean signal path

Recommended Applications

  • Vocals
  • Voice Over and Broadcast
  • High SPL sources, such as Kick Drums and Bass Guitar Amps
  • Electric Guitar
  • Piano
  • Drum Overheads, Drum Rooms

公司简介:

David Royer started Mojave Audio in 1985 in the garage of his house. The location was Fullerton, California, and Mojave Audio was a one-man, custom pro audio gear shop. David is best known for his ribbon microphone designs with Royer Labs, but he originally started out designing and building vacuum tube microphones, mic preamps and compressors for engineers in the Los Angeles area.

Since the mid 1990’s, David’s custom Mojave products have been used on a number of well-known recordings and have achieved legendary status among a small circle of high-end engineers. Mojave Audio Inc. was launched in 2005 to bring David’s condenser mic designs to the world.

What makes Mojave different?  A Mojave microphone’s journey begins and ends in Burbank, CA. US made Jensen transformers and NOS (new old stock) tubes are shipped offshore and mated to capsules and bodies, according to David Royer‘s design specifications, at a highly respected factory that David has worked with for over 15 years. All Mojave microphones are constructed with respect to David’s unprecedented research and attention to electronic design and quality. After assembly, they are shipped back to Burbank for extensive QC inspections. Prior to packaging, every mic is burned in for 24 hours, tested and personally listened to by David.

Very few companies (and none in Mojave’s price range) invest so much in the audio components. The high quality Jensen transformers alone, cost more than many import mics. The NOS tubes are military spec. The FET’s are top quality and the resisters are custom made. At Mojave it’s a given that no sacrifices are made in the critical signal path electronics.
This hybrid of domestic and overseas manufacturing allows us to make superb microphones that are affordable without compromise.

 个人评语:没用过,看话筒的样子不大好拆(应该是拧的),哈哈。这款是Mojave Audio最新推出的双振膜真空管话筒。这个品牌的LOGO是手写签名,艺术感挺强。不便宜~老美的手工话筒品牌~~业内小有名气~~具体还得看下高手评测哈~这里只做个小展示~

个人签名
555
IP 属地:沈阳
相关帖子
收藏 顶 0 踩 0
0
1首页上一页1下一页尾页
技术支持: 云畅网站建设 | 管理登录
×
seo seo

消息内容

×
消息长度最多可添加100个汉字或者200个字母

回复内容

×

编辑回复内容

×